BiPAP Auto M Series with Bi-Flex®

The ultimate in sleep therapy comfort.

The BiPAP Auto is the first device to combine auto adjusting pressure delivery with the breath-by-breath pressure relief of Bi-Flex. This is the most natural sleep therapy you can find, and it comes complete with our Encore Pro SmartCard technology.

Bi-Flex "softens" airflow at inhalation and exhalation, making breathing more natural and comfortable for patients. In Bi-Flex mode, patient-adjustable pressure relief is provided at the critical stages:
  1. EPAP to IPAP
  2. IPAP to EPAP
  3. During exhalation

Developed from the proven REMstar Auto, the BiPAP Auto features a proactive, multi-level algorithm that analyzes several parameters to monitor and respond to a patient's breathing. A key parameter is flow limitation (a common early indication of complete obstruction). The auto algorithm performs two types of tests (Pcritical and Poptimal ) that allow the pressure to be maintained at a level at which obstruction is not likely to occur but is not unnecessarily high, thus maximizing patient comfort.

Pcrit test - IPAP is slowly decreased while the flow signal is monitored for indications of flow limitation. This test ensures that effective therapy is maintained at the minimal pressure.
Popt test - IPAP is slowly increased while the flow signal is monitored for improvements in a patient's airway. This test ensures that maximum therapeutic levels are obtained.

This ongoing proactive search of Pcrit and Popt levels allows for maximum therapeutic effectiveness at minimum pressures without creating any
uncomfortable spikes in pressure or patient arousals.

While the algorithm is performing its proactive tests, it is also monitoring the patient's breathing patterns for occurrences of obstructive events such as snore, hypopnea or apnea. If a snore or apnea is detected, the
algorithm will quickly but smoothly raise EPAP to eliminate the event. If a hypopnea is detected, the algorithm will raise IPAP to eliminate the event.



Finally, the algorithm can also detect and respond to the presence of elevated leak by lowering IPAP levels to improve mask seal.

Features

• Auto-adjusting - Bi-level pressure delivery
• Multi-level algorithm - Uses two different sets of analytical parameters to keep track patient's breathing.
• Bi-Flex - Softens the air at inhalation and exhalation to provide more comfortable therapy
• Digital Auto-Trak™ Sensitivity - Tracks and reacts to a patient's natural breathing pattern. It can detect the point of inhalation and exhalation in every breath, allowing Bi-Flex to make each breath more comfortable.
• Integrated Humidification - Options help to improve compliance
• Encore® Pro SmartCard® and Data Management Software allow providers to track treatment progress.
• Enhanced Event Reporting - Tracks factors like apnea / hypopnea index, leak and snore.
• 4 - 25 cm H2O pressure range

PRODUCT SPECIFICATIONS
PRESSURE	4 to 25 cm H2O
RAMP TIME	0 to 45 minutes (5-minute increments)
STARTING RAMP PRESSURE	4 cm H2O to EPAP; patient-adjustable
DIMENSIONS	7.5"(L) x 5.0"(W) x 3.1"(H) 19.0 cm(L) x 12.7 cm(W) x 7.9 cm(H)
WEIGHT	2.2 lbs. (1.0 kg)
FILTERS	Pollen and optional ultra-fine
DEVICE SET-UP	LCD keypad
DATA STORAGE CAPACITY (minimum)	Display: 7 and 30-day averages SmartCard: 6 months at 3 usage sessions per day, 7 days in-depth analysis
DATA STORAGE CONTENT	SmartCard: Date/time, hours of usage patterns, AHI, leak, snore, FOSQ
COMPLIANCE MONITORING	Breathing detection
ALTITUDE COMPENSATION	Automatic
ELECTRICAL REQUIREMENTS	100 - 240 VAC 50/60 Hz
HUMIDIFICATION	Integrates with M Series Heated and M Series Pass-Over Humidifiers
DC POWER	Direct-connect cord
WARRANTY	2 years
MISC	Lighted LEDs, Auto on/off, mask off alert, patient reminders