REMstar® Pro M Series with C-Flex™
- Available May 24, 2006 to all U.S. customers in core package only (w/heated humidifier)
- Includes Encore Pro SmartCard capability to give you the power of enhanced compliance reporting of apnea/hypopnea index, elevated leak levels, and snoring
- It's the most versatile CPAP ever offered by Respironics
The REMstar Pro starts with consumer appeal:
- a small, sleek device and case
- a less obtrusive profile with tubing connected in the back
- a "hidden" water chamber
And continues with user-friendly functionality:
- lighted primary touch controls for power, ramp, and C-Flex
- LCD display and controls for advanced reporting and set up
- easy turn humidification dial
- a water chamber that is easy to remove, fill and replace
- delivers continuous humidification throughout the night
- automatic adjustment for changes in altitude when traveling
In addition, Encore Pro's SmartCard records mask leaks, apnea/hypopnea index and snoring. This allows you to interact more closely with your physician and homecare provider for enhanced treatment.
The REMstar Pro is convenient for travel with and without the integrated humidifier. The standard travel carry case has been updated with a new sleeker look. An optional travel pack is also available for packing the device in a suitcase. It includes a compact case for the device and a lightweight zippered pouch for mask accessories.
Photo References
(Click on images for more detail)
|
 |
 |
REMstar Pro M Series Unit Only |
REMstar Pro M Series Unit Only - Lid Up |
REMstar Pro M Series Screen |
 |
 |
 |
REMstar Pro M Series with Integrated Humidifier |
REMstar Pro M Series with Integrated Humidifier Open |
REMstar Pro M Series with Integrated Humidifier Open, and Chamber Out |
Product Specifications
- Pressure: 4 to 20 cm H2O
- Ramp Time: 0 to 45 min. (5-min. increments)
- Starting Ramp Pressure: 4 to CPAP; user adjustable
- Dimensions: 7.5" L x 5.0" W x 3.125" H (19cm L x 12.7cm W x 7.9cm H )
- Weight: 2.2 lbs
- Filters: Pollen and optional ultra-fine
- Device Set-Up: LCD/Keypad and Encore® Pro SmartCard® (optional)
- Data Storage Capacity (minimum): Display: 7 and 30 day averages, SmartCard: 6 months a 3 usage sessions per day, 7 days in-depth analysis
- Data Storage Content: SmartCard: Date/time, hours of use, usage patterns, AHI, leak, snore, FOSQ
- Compliance Monitoring: Breathing detection
- Altitude Compensation: Automatic
- Electrical Requirements 100 - 240 VAC, 50/60 Hz (An adapter may be needed to plug the CPAP into a wall outlet outside the US.)
- Humidification: Integrated Heated Humidifier and Pass-over Humidifier
- DC Power: Direct connect cord, 12 VDC
- Warranty: 2 years
- Special User Features: Lighted LEDs, Auto on/off, mask off alert, patient reminders
Respironics offers accessories for regular maintenance of your CPAP machine:
- Pollen Filters - grey, should be replaced every 6 months
- Ultra-Fine Filters - white, should be replaced every 30 days
Additional Replacement Accessories
- Reusable Patient Tubing (with swivel)
- Tubing Swivel - connects tubing to device
Traveling with your REMstar
Respironics offers a variety of accessories to make travel easy with your REMstar:
- Carrying Case - Black with shoulder strap and compartments for accessories
- Travel Pack - Compact case and accessory pouch
Optional Power accessories
- 12 Volt DC Cord - to operate Respironics' CPAP systems when AC power is not available. The cord plugs into a standard cigarette lighter socket found in most automotive vehicles.
- DC Battery Adapter Cable - for use with any 12 VDC deep cycle marine-type-battery. Note, the battery adapter must be connected to either the DC Interface Module of the DC Cord to enable operation.
- Portable Battery Pack - provides up to 26 hours of operation and can be recharged in approximately 10 hours or less with the 12V universal battery charger. The entire system is easily transported in a carrying case. The charger and battery may be purchased as a system or separately.
